This Blow Off, or Dump valve, has been developed for the Toyota Yaris GR Turbo engine that has the electronically controlled bypass valve (OE Part no. 7.04654.08). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing.
_x000D_ _x000D_The Forge motorsport valve solution is available in either Atmospheric where a noise is heard when the throttle is lifted or the Factory type non noise recirculating valve.
_x000D_ _x000D_
_x000D_
_x000D_
Our alternative is a fully engineered solution offering significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation.
_x000D_ _x000D__x000D_ _x000D_
In The Box:
_x000D_
1 x FMDV34 Valve
_x000D_
1 x 2.5m of 4mm Vacuum Tube
_x000D_
1 x 4mm Brass T-piece
_x000D_
1 x 3 port Solenoid and fixings
_x000D_
10 x Cable Ties
_x000D_
1 x Uprated Red Spring
_x000D_
1 x Wiring loom
_x000D_
1 x Forge USB Instructions
_x000D_
1 x Forge Keyring and Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
_x000D_ _x000D_