We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
_x000D_ _x000D_This Blow Off, or Dump valve, is for the BMW 135/235 N55 3.0 Turbo engines 2012-2013 are PWG (Pneumatic Waste Gate) , that have the electronically controlled bypass valves. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing.
_x000D_ _x000D_Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation.
_x000D_ _x000D__x000D_ _x000D_
In The Box:
_x000D_
1 x FMDVF20A Valve
_x000D_
1 x 3000mm of 4mm Vacuum Tube
_x000D_
1 x 100mm of 6mm Vacuum Tube
_x000D_
1 x 50mm of 6mm Vacuum Tube
_x000D_
1 x Solenoid, Bracket, and Screws
_x000D_
10 x Cable Ties
_x000D_
1 x Uprated Blue Spring
_x000D_
1 x 8-4-8 T Piece
_x000D_
1 x Forge USB Instructions
_x000D_
1 x Forge Keyring and Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
_x000D_