IE 2.0T FSI/TSI/TFSI Intake Manifold Hampton Tuning
IE 2.0T FSI/TSI/TFSI Intake Manifold Hampton Tuning
IE 2.0T FSI/TSI/TFSI Intake Manifold Hampton Tuning
IE 2.0T FSI/TSI/TFSI Intake Manifold Hampton Tuning

IE 2.0T FSI/TSI/TFSI Intake Manifold

  • Sale
  • $1,098.00

VW Volkswagen Integrated Engineering 2.0l TSI FSI intake manifold velocity stacks

The Integrated Engineering 2.0T FSI/TSI/TFSI intake manifold was carefully designed to provide an effective power increase across the entire rpm range with no loss in low-end power or spool time, with the ability to be used on any turbo setup, including the stock turbo. We have incorporated several motorsport features into this intake manifold, making it outperform the factory unit, as well as other aftermarket manifolds available.  (Compatible with EA113 & EA888 GEN1/GEN2.)

VW Volkswagen Integrated Engineering 2.0l TSI FSI intake manifold










USA CAST ALUMINUM
Cast from select grade aluminum, this manifold makes a great replacement for the stock plastic unit, which is common failure point.		 FLOW TUNED VELOCITY STACKS
Runners are aggressively sized and velocity stacks have been optimally tuned for large power increases throughout the entire RPM band.











OPTIMIZED PLENUM VOLUME
Shaped to distribute airflow as evenly as possible, the plenum also holds a massive 2.4L. This ensures a steady supply of air from throttle tip in to full spool up.		 QUICK SPOOL
With carefully selected runner diameter and length, the IE manifold provides a good balance of power gains throughout the entire powerband, with no loss in spool time or low-end power.

 


REQUIRES MANIFOLD ECU SOFTWARE


The IE 2.0T Intake Manifold is a true performance designed intake manifold and requires specific tuning to the ECU software to take advantage of the larger plenum volume, runner size, resonance tuning, and velocity stacks to gain the power increase. Simply bolting the manifold on your existing ECU tune is unlikely to gain the optimum power available. Additionally, installing the IE manifold will remove the factory plastic manifold's runner flaps. Removing the runner flaps will cause a check engine light (CEL) and possible rough cold starts, especially in cold weather. Your manifold tune must turn off the runner flap codes to remove the CEL and re-tune the warm-up maps to accommodate for the cold starts. Please ensure your ECU tuner can provide you with manifold software before purchasing.

WATER/METHANOL READY


Each runner is ready for individual water/methanol injection nozzles. The cast and pre-drilled and threaded 1/8" NPT ports located on each runner will make installing your water/meth setup easy. For builds not using water/methanol injection, you can simply block off the ports using the provided black plugs. This requires a 1/8" thread "elongated" nozzle to use with our manifold. These nozzles are manufactured by Aquamist and available through aquamist-direct.com for purchase.

 

VEHICLE FITMENT BY ENGINE


Requires vehicle specific install kit for complete installation.

VW & Audi - 2.0T FSI EA113 Engines


  • Audi - A4 2005-2008 (B7) 2.0T EA113 TFSI engines

  • Audi - A6 2005-2011 (C6) 2.0T EA113 TFSI engines

  • Audi - A6 Allroad 2005-2011 (C6) 2.0T EA113 TFSI engines

  • Audi - TT 2008-2015 (MK2 - 8J) 2.0T EA113 TFSI engines

  • Audi - TTS 2008-2015 (MK2-8J) 2.0T EA113 TFSI engines

  • Audi - A3 2006-2013 (MK2 - 8P) 2.0T EA113 TFSI engines

  • VW - Golf R 2012-2013) (MK6) 2.0T EA113 FSI/TSI engines

  • VW - GTI 2006-2009 (MK5) 2.0T EA113 FSI engines

  • VW - Jetta & Jetta GLI 2006-2010 (MK5) 2.0T EA113 FSI engines

  • VW - Passat 2006-2010 (B6) 2.0T EA113 FSI engines


VW & Audi - 2.0T TSI EA888 Gen 1/2 Engines

  • Audi - A4 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*

  • Audi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*

  • Audi - A5 2008-2015 (B8 - B8.5) 2.0T TSI EA888 Gen 1/2 engines*

  • Audi - A6 2012-2015 (C7 - C7.5) 2.0T TSI EA888 Gen 1/2 engines*

  • Audi - TT 2008-2015 (MK2 - 8J) 2.0T TSI EA888 Gen 1/2 engines*

  • Audi - A3 2006-2013 (MK2 - 8P) 2.0T TSI EA888 Gen 1/2 engines*

  • VW - GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen 1/2 engines*

  • VW - GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*

  • VW - Jetta & Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*

  • VW - SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1/2 engines*

  • VW - CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 & 2 engines*

  • VW - Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 & 2 engines*


*Does not fit B8/B8.5 A4 & A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.

*Fits VW & Audi 2.0T FSI EA113 and TSI EA888 Gen 1/2 engines only, does not fit MK7/MQB EA888 Gen 3 engines.